Mortality Query Module Configuration Selection
Small Area Data
{{class GreenText For information on the New Mexico Small Area Methodology, please visit [http://ibis.health.state.nm.us/resource/SmallAreaMethods.html]. }}2017 Population Data -- Estimates Revised Back to 2010
{{class BlueText 2017 population estimates were added to the population estimates query module on 8/24/2018. The population counts have been re-estimated going back to 2010. Please note that the new, vintage August 20, 2018, estimates are now being used as population denominators for all NM-IBIS query modules. The new population estimates will cause NM-IBIS to produce rates for the 2010-2017 period that may be slightly different from rates calculated by NM-IBIS prior to 3:00 PM, 8/24/2018. Any differences are expected to be very small.}}Getting Started
Click on a blue bar to open and close selections to see a list of measures available.- Deaths - Count
Count
This module returns the number of deaths. Crude Rate
This module returns the number of deaths, the number in the population, the crude death rate (deaths per 100,000 persons), and the upper and lower 95% confidence interval limits for the rate.- Standard Query
Moving Averages
Moving averages are used to "smooth" trend lines that would otherwise be unstable. Often, the population size will be too small to yield a smooth trend line. By combining multiple years, the data will be more stable. "Moving averages" are overlapping, aggregated year groups. They are overlapped so that more data points may be displayed, and also so the line shows changes more gradually.
Age-Adjusted Rates
This module returns the number of deaths, the number in the population, the age-adjusted death rate (deaths per 100,000 persons, age-standardized to the U.S. 2000 population), and the upper and lower 95% confidence interval limits for the rate.- Standard Query
Moving Averages
Moving averages are used to "smooth" trend lines that would otherwise be unstable. Often, the population size will be too small to yield a smooth trend line. By combining multiple years, the data will be more stable. "Moving averages" are overlapping, aggregated year groups. They are overlapped so that more data points may be displayed, and also so the line shows changes more gradually.
Leading Causes of Death
This query returns deaths for the 15 leading causes of death in New Mexico, based on the number of deaths and the NCHS groupings for "50 Rankable Causes of Death."- Leading Causes: Counts
Leading Causes of Death by Count
This module calculates the number of deaths for the NCHS 50 leading causes of death. You can sort the death rates on the results page to get the leading causes.
You can filter the data by year, age, sex, and geographic area. - Leading Causes: Crude Rates
Leading Causes of Death by Crude Rate
This module calculates death rates (number of deaths per 100,000) for the NCHS 50 leading causes of death. You can sort the death rates on the results page to get the leading causes.
You can filter the data by year, age, sex, and geographic area. - Leading Causes: Age-adjusted Rates
Leading Causes of Death by Age-Adjusted Rate
This module calculates age-adjusted death rates (number of deaths per 100,000, age-standardized to the U.S. 2000 population) for the NCHS 50 leading causes of death. You can sort the death rates on the results to get the leading causes.
You can filter the data by year, sex, and geographic area.
Life Expectancy
These queries return average life expectancy for the population selected. For information on life expectancy calculation, please visit the NM-IBIS Life Expectancy page.- Life Table
Life Table
This module returns the expected number of years of life remaining for persons of a given age, at five-year age intervals. - Life Expectancy from Birth
Life Expectancy From Birth
This module returns the expected number of years of life from birth. - Life Expectancy from Age 65
Life Expectancy From Age 65
This module returns the expected number of years of life from age 65.
YPLL
This query returns the Years of Potential Life Lost (YPLL) for the selected population and condition(s). "Years of Potential Life Lost" is calculated as 75 minus a person's age at time of death.- Number of Years of Potential Life Lost (YPLL) Before Age 75
- YPLL Before Age 75 per 100,000 Population, Standard Query
Moving Averages
Moving averages are used to "smooth" trend lines that would otherwise be unstable. Often, the population size will be too small to yield a smooth trend line. By combining multiple years, the data will be more stable. "Moving averages" are overlapping, aggregated year groups. They are overlapped so that more data points may be displayed, and also so the line shows changes more gradually.
- Average Age at Time of Death
Average Age at Time of Death
This module returns the average age at death. You can filter or group the data by cause of death, year, age, sex, and geographic area.
- Deaths - Count
Count
This module returns the number of deaths. Crude Rate
This module returns the number of deaths, the number in the population, the crude death rate (deaths per 100,000 persons), and the upper and lower 95% confidence interval limits for the rate.- Standard Query
Moving Averages
Moving averages are used to "smooth" trend lines that would otherwise be unstable. Often, the population size will be too small to yield a smooth trend line. By combining multiple years, the data will be more stable. "Moving averages" are overlapping, aggregated year groups. They are overlapped so that more data points may be displayed, and also so the line shows changes more gradually.
Age-Adjusted Rates
This module returns the number of deaths, the number in the population, the age-adjusted death rate (deaths per 100,000 persons, age-standardized to the U.S. 2000 population), and the upper and lower 95% confidence interval limits for the rate.- Standard Query
Moving Averages
Moving averages are used to "smooth" trend lines that would otherwise be unstable. Often, the population size will be too small to yield a smooth trend line. By combining multiple years, the data will be more stable. "Moving averages" are overlapping, aggregated year groups. They are overlapped so that more data points may be displayed, and also so the line shows changes more gradually.
Leading Causes of Death
This query returns deaths for the 15 leading causes of death in New Mexico, based on the number of deaths and the NCHS groupings for "50 Rankable Causes of Death."- Leading Causes: Counts
Leading Causes of Death by Count
This module calculates the number of deaths for the NCHS 50 leading causes of death. You can sort the death rates on the results page to get the leading causes.
You can filter the data by year, age, sex, and geographic area. - Leading Causes: Crude Rates
Leading Causes of Death by Crude Rate
This module calculates death rates (number of deaths per 100,000) for the NCHS 50 leading causes of death. You can sort the death rates on the results page to get the leading causes.
You can filter the data by year, age, sex, and geographic area. - Leading Causes: Age-adjusted Rates
Leading Causes of Death by Age-Adjusted Rate
This module calculates age-adjusted death rates (number of deaths per 100,000, age-standardized to the U.S. 2000 population) for the NCHS 50 leading causes of death. You can sort the death rates on the results to get the leading causes.
You can filter the data by year, sex, and geographic area.
Life Expectancy
These queries return average life expectancy for the population selected. For information on life expectancy calculation, please visit the NM-IBIS Life Expectancy page.- Life Table
Life Table
This module returns the expected number of years of life remaining for persons of a given age, at five-year age intervals. - Life Expectancy from Birth
Life Expectancy From Birth
This module returns the expected number of years of life from birth. - Life Expectancy from Age 65
Life Expectancy From Age 65
This module returns the expected number of years of life from age 65.
YPLL
This query returns the Years of Potential Life Lost (YPLL) for the selected population and condition(s). "Years of Potential Life Lost" is calculated as 75 minus a person's age at time of death.- Number of Years of Potential Life Lost (YPLL) Before Age 75
- YPLL Before Age 75 per 100,000 Population, Standard Query
Moving Averages
Moving averages are used to "smooth" trend lines that would otherwise be unstable. Often, the population size will be too small to yield a smooth trend line. By combining multiple years, the data will be more stable. "Moving averages" are overlapping, aggregated year groups. They are overlapped so that more data points may be displayed, and also so the line shows changes more gradually.
- Average Age at Time of Death
Average Age at Time of Death
This module returns the average age at death. You can filter or group the data by cause of death, year, age, sex, and geographic area.
- Counts
Count
This module returns the number of deaths. - Crude Rates
Crude Rate
This module returns the number of deaths, the number in the population, the crude death rate (deaths per 100,000 persons), and the upper and lower 95% confidence interval limits for the rate. - Age-adjusted Rates
Age-Adjusted Rates
This module returns the number of deaths, the number in the population, the age-adjusted death rate (deaths per 100,000 persons, age-standardized to the U.S. 2000 population), and the upper and lower 95% confidence interval limits for the rate. - Average Age at Time of Death
Average Age at Time of Death
This module returns the average age at death. You can filter or group the data by cause of death, year, age, sex, and geographic area. Life Expectancy
These queries return average life expectancy for the population selected. For information on life expectancy calculation, please visit the NM-IBIS Life Expectancy page.- Life Expectancy from Birth
Life Expectancy From Birth
This module returns the expected number of years of life from birth. - Life Expectancy from Age 65
Life Expectancy From Age 65
This module returns the expected number of years of life from age 65.
YPLL
This query returns the Years of Potential Life Lost (YPLL) for the selected population and condition(s). "Years of Potential Life Lost" is calculated as 75 minus a person's age at time of death.
